Liqui Moly Tyre Repair ,Inflator and Sealer (300ml)

Description

Liqui Moly Tyre Repair Inflator and Sealer (300ml) / Reifen-
Reparatur-Spray

1. Suitable for all motorcycle tyres with or without inner tubes.
2. Repairs and reinflates tyres immediately without removal or tools.
3. Seals flat tires and pumps them back up.
4. After a repair, drive only at moderate speed.
5. The tire must be reconditioned or replaced at the next opportunity.
6. For all tire types with and without tubes.
7. Do not use if the tube is torn or if the tire has slipped off the rim or if the outer cover has a lateral tear!
8. IMPORTANT:Tire pressure monitoring systems in tires can be destroyed by the solvents contained in the product.
9. The Liqui Moly TYRE REPAIR container is pressurized and permits all types of tyres to be reinflated, for tyres over 15″, a second spray might be necessary.
10. Enables several hundred kilometres to be covered before repairing using the traditional methods.
11. Shock-resistant aluminium spray.
12. Each part of the motorcycle needs specific care.

Usage

1. Remove If Possible The Object Which Caused The Puncture.
2. Position The Tyre Valve At The Top.
3. Completely Deflate The Tyre.
4. Shake Vigorously Liqui Moly Tyre Repair.
5. In Cold Weather, Reheat It In Your Hands Or Near The Engine.
6. Clean The Screw On The Valve.
7. Screw On The Liqui Moly Tyre Repair Connector.
8. Remove The Protection Capsule.
9. Position The Spray Upside Down.
10. Press The Button Until The Tyre Is Totally Reinflated.
11. Drive Immediately For 10 To 20 Km At Moderate Speed So That The Product Is Evenly Distributed.
12. Control The Pressure As Soon As Possible And During The Following Days And Adjust It.
13. You Can Confidently Drive Several Hundred Kilometres Before Repairing The Tyre In The Traditional Way.